In the name of Allah who is the most beneficient and merciful
This system forms closed circuit water passing from the engine returns through cooler to the p/p suction and then back to engine. A header and expansion tank is placed at a reasonable height to allow venting and pressurizing of the sys. This is connected to both the engine discharge and the pump suction line. A heater is included with a bypass and the sys can warm the engine when necessary. Cooling water at the lower end of cylinder jackets passing upto connection from the top of the jacket to the cylinder cover and then exhaust valve(if there). A restricted amount of water is taken from this discharge and passes through turbocharger cooling spaces and air separator is fitted in the return which discharge any trapped air to expansion tank. Other venting connection are taken from top of the engine system, the turbocharger and the cooler.
WRITTEN BY S/C ZEESHAH AHMED
LECTURE BY: CHIEF ENGR. YASEEN SAHAB
EMAIL: ZEETEC4@YAHOO.COM
DATE: 12.july.2009
This comment has been removed by the author.
ReplyDeleteHi Dude,
ReplyDeleteThis is a great blog. Jacket water cooling system used to maintain the engine temperature at the desirable limit. The cooling water header line is fitted on the exhaust side of the engine. Thank you for sharing it with us.
Bio Fouling